Skip to main content
CalcSummitCalcSummit
Cost Calculators · Published 2026 ranges

Deck Construction Cost Calculator: Price Every Line Item

  • Updated November 2026
  • Sources Cited
  • No Login Required
  • Free to Use

Deck Construction Cost Calculator

Enter your deck size, pick a decking material, then add railing, stairs and footings. Each line is priced at the low and high end of a published range. The calculator runs in your browser and stores nothing.

Deck cost by line item
Version 2026-11

2 to 100 ft.

2 to 100 ft.

Boards only, installation not included.

0 if none.

0 if none. Priced per stair.

From your plan. Labor per post.

Priced lines for 192 sq ft

$5,119 to $18,530

Midpoint $11,825, about $62 per sq ft. An estimate, not a bid.

Low and high deck cost for each priced line
LineBasisLowHigh
Decking boards, pressure-treated wood192 sq ft$384$960
Professional labor192 sq ft$2,880$6,720
Railing40 linear ft$1,400$8,400
Stairs3 stairs$75$150
Footings and posts, labor6 posts$150$1,800
Building permitper deck$230$500
Total of priced lines$5,119$18,530

Cross-check: Angi reports $30 to $60 per sq ft for a finished deck. On 192 sq ft that is $5,760 to $11,520. The low and high ends above will not both occur on one job, so read the midpoint with that range.

Not priced here: framing lumber, joist hangers and fasteners; concrete and footing forms; ledger flashing; lighting, built-in seating and covers; stain or sealer; sales tax.

The result covers priced lines only. It leaves out framing lumber, concrete, flashing and sealer, so the cross-check under the result shows the published all-in range for the same area. For board counts, joists and posts, use the deck calculator. For another project type, use the construction cost calculator.

Deck Cost per Square Foot: What the Published Ranges Say

Angi, Bob Vila and Inch Calculator all put the installed cost of a deck at $30 to $60 per square foot. That range covers boards, framing, labor and common add-ons. On a 12x16 deck of 192 sq ft it comes to $5,760 to $11,520.

National averages for a whole deck sit near $8,000. Angi reports $8,200 with a normal range of $4,341 to $12,526. HomeAdvisor reports $8,265 with $4,340 to $12,602. Inch Calculator gives $8,000 and $4,400 to $12,000. NerdWallet opens with a higher $14,000 average and a $9,000 to $20,000 typical range, then quotes Angi's $8,246 further down. The averages are not one number, so this page works from the per-square-foot range.

Height changes the rate. HomeAdvisor lists $10 to $20 per sq ft for a ground-level deck and $40 to $50 for a second-story deck. It lists $30 to $75 for an elevated concrete or multi-level deck. Its ground-level range sits below Angi's $30 to $60, and neither source explains the gap. Use $30 to $60 as the all-in range and read the deck-type ranges as a sign that height raises cost.

Sources: Angi, updated November 20, 2024; HomeAdvisor, 2025 edition; Bob Vila, modified June 6, 2023; Inch Calculator, updated July 7, 2023; NerdWallet, updated November 26, 2025. Read November 2026.

Deck Construction Cost by Size

Deck cost scales with area. The table multiplies each common size by the published $30 to $60 per sq ft installed range. A 14x20 deck of 280 sq ft comes to $8,400 to $16,800.

Installed deck cost by size at $30 to $60 per square foot
Deck size (ft)Area (sq ft)Low, $30 per sq ftHigh, $60 per sq ft
10x10100$3,000$6,000
12x12144$4,320$8,640
12x16192$5,760$11,520
12x20240$7,200$14,400
14x20280$8,400$16,800
16x20320$9,600$19,200
20x20400$12,000$24,000

Angi publishes its own rows for three sizes: 10x10 at $4,000 to $6,000, 12x12 at $5,760 to $8,640 and 20x20 at $16,000 to $24,000. Those rows work out to $40 to $60 per sq ft, a narrower range than the $30 to $60 in Angi's text. Use the table for a wide range and Angi's rows for a tighter one. Trex's deck cost FAQ lists $8,400 to $16,800 for a 14x20 deck, which matches the $30 to $60 result here.

Totals are arithmetic: area x $30 and area x $60. Source rate: Angi. Rows for 10x10, 12x12 and 20x20: Angi size table.

Deck Cost by Material

Boards are one line of the bill. Pressure-treated boards cost $2 to $5 per sq ft and composite boards cost $12 to $22, before labor. On a 192 sq ft deck that is $384 to $960 against $2,304 to $4,224 for the boards alone.

Decking board cost per square foot by material, installation excluded
MaterialBoards per sq ftBoards on 192 sq ftSource
Pressure-treated wood$2 to $5$384 to $960Angi; HomeAdvisor
Cedar$3 to $7$576 to $1,344Angi; HomeAdvisor
Composite$12 to $22$2,304 to $4,224Angi; HomeAdvisor
Ipe hardwood$10 to $20$1,920 to $3,840Angi; HomeAdvisor
Vinyl or PVC$5 to $13$960 to $2,496NerdWallet
Bar chart of decking board cost per square foot: pressure-treated $2 to $5, cedar $3 to $7, vinyl or PVC $5 to $13, ipe $10 to $20, composite $12 to $22
Figure B. Board-only cost per square foot by material. Sources: Angi and HomeAdvisor for wood, ipe and composite; NerdWallet for vinyl or PVC.

Composite has the widest spread between sources. Angi and HomeAdvisor list $12 to $22 per sq ft. Decks.com lists $5 to $14, Bob Vila $4 to $12 and NerdWallet $5 to $20. Decks.com carries a Trex Company copyright notice. This page uses the Angi and HomeAdvisor figures, which match each other, and lists the lower figures so you can see the gap.

Material also changes the frame. The deck calculator caps joist spacing at 16 in. on center for composite, so a composite deck can need more joists than a pressure-treated one. The calculator above does not price that framing difference.

Labor, Permit, Railing, Stairs and Footings: The Line Items

Professional labor runs $15 to $35 per sq ft, according to Angi, HomeAdvisor, Bob Vila and Inch Calculator. Railing, stairs, footings and the permit add separate lines. The table lists each range the calculator uses.

Deck cost line items with low and high ranges and sources
LineRangeUnitSource
Professional labor$15 to $35per sq ftAngi, HomeAdvisor, Bob Vila, Inch Calculator
Framing labor (reference)$9 to $12per sq ftAngi, HomeAdvisor. Not added to labor.
Railing$35 to $210per linear ftHomeAdvisor, Bob Vila
Stairs$25 to $50per stairHomeAdvisor, Bob Vila
Footings, labor$25 to $300per postBob Vila
Building permit$230 to $500per deckAngi, HomeAdvisor
Old deck removal$5 to $15per sq ftHomeAdvisor, Bob Vila

Decks.com shows a lower labor range of $8 to $22 per sq ft. Bob Vila prices railing material per linear foot. Wood runs $40 to $60, metal $55 to $85, composite $80 to $165, cable $115 to $175 and glass $140 to $210. Bob Vila and Inch Calculator put the permit at $225 to $500, and HGTV says permits average about $500.

Your plan sets the number of posts. For concrete volume in round footing forms, use the sonotube calculator. For step count and rise, use the stair calculator. The labor cost calculator covers other trades.

Hidden Costs the Per-Square-Foot Rate Leaves Out

A per-square-foot rate hides the items a bid lists one by one. The calculator does not price framing lumber, hardware, concrete, flashing, lighting, sealer or sales tax. No source read for this page gives a figure for them.

Warning
Check the bid for these lines.Permit ($230 to $500), removal of an old deck ($5 to $15 per sq ft), footing labor ($25 to $300 per post), framing lumber, concrete, flashing and sealer. A local deck builder's guide adds unexpected soil, old concrete footings and tree roots as extra scope.

Sources disagree on how much of the bill is labor. Angi's cost breakdown chart shows labor at 38 percent of the total. HGTV says labor will likely be more than two-thirds of the price. Ask for materials and labor on separate lines so you can compare quotes.

Season changes labor. On the seasonal cost calculator, Sarah Kim, CPEwrites: "Summer labor runs 18–25% above the annual average." She also writes: "Winter labor drops 12–15% below the annual average." Apply that shift to the labor line, not to boards.

Sources: Angi; HGTV, updated March 12, 2026; Estate Deck and Fence, hidden-cost guide, read September 2026; CalcSummit seasonal cost calculator.

Worked Example: A 12x16 Pressure-Treated Deck

A 12x16 deck of pressure-treated boards, 40 ft of railing, 3 stairs, 6 footings and a permit has priced lines of $5,119 to $18,530. The midpoint is $11,825, about $62 per sq ft.

  1. Multiply length by width: 12 x 16 = 192 sq ft.
  2. Price each line at its low and high rate, as in the table below.
  3. Add the low ends and the high ends: $5,119 and $18,530.
  4. Compare with the all-in range: 192 x $30 to $60 = $5,760 to $11,520.
Line items for a 12x16 pressure-treated deck
LineBasisLowHigh
Decking boards, pressure-treated wood192 sq ft$384$960
Professional labor192 sq ft$2,880$6,720
Railing40 linear ft$1,400$8,400
Stairs3 stairs$75$150
Footings and posts, labor6 posts$150$1,800
Building permitper deck$230$500
Total of priced lines$5,119$18,530
Bar chart of low and high cost by line for a 12x16 deck: boards $384 to $960, labor $2,880 to $6,720, railing $1,400 to $8,400, stairs $75 to $150, footings $150 to $1,800, permit $230 to $500
Figure C. Low and high cost for each line of the 12x16 example. Rates: Angi, HomeAdvisor, Bob Vila. Arithmetic by CalcSummit.

The low total of $5,119 falls under the all-in low of $5,760 because framing lumber and concrete are not priced. The high total of $18,530 rises above the all-in high of $11,520because it adds top-of-range railing, labor and footings at once. Railing at $210 per linear foot is $8,400 of that high total. A single job is unlikely to sit at every high end, so read the midpoint and the all-in range together.

Tip
Cut the railing length or pick a lower-priced railing material first. Railing has the widest range of any line: $35 to $210 per linear foot.

Sources, Method and Last Verified

Every range on this page comes from a public cost guide read in November 2026. The page adds no CalcSummit price estimate. Figures were last verified on the date shown at the top of the page.

  • Angi, How Much Does It Cost to Build a Deck?, angi.com, updated November 20, 2024.
  • HomeAdvisor, How Much Does It Cost to Build a Deck in 2025?, homeadvisor.com.
  • NerdWallet, The Cost to Build a Deck in 2026, nerdwallet.com, updated November 26, 2025.
  • Bob Vila, How Much Does It Cost to Build a Deck?, bobvila.com, modified June 6, 2023.
  • Inch Calculator, Cost to Build a Deck, inchcalculator.com, updated July 7, 2023.
  • HGTV, How Much Does It Cost to Build a Deck?, hgtv.com, updated March 12, 2026.
  • Decks.com, Calculate the Cost to Build a Deck, decks.com, undated.

Method: each line is a size or count multiplied by the low and the high end of a published range. The total adds the lines. The midpoint is the average of the low and high totals. The cross-check is area multiplied by Angi's $30 to $60. Source years run from 2023 to 2026, so older figures may sit below current prices.

Note
The page has no regional price table. Prices vary by market, and no dated regional deck source was read for this page. The sources also do not say whether the $15 to $35 labor range includes the $9 to $12 framing labor, so framing labor is shown for reference and not added.
Warning
Check your numbers with a professional. This is a budgeting estimate. Get written quotes from licensed contractors before you sign a contract. For the deck frame, see the deck building guide.

Update log: November 2026. Page published. Next scheduled review February 2027.

Sarah Kim, CPE, CPE — CalcSummit expert reviewer

Reviews: cost calculators · 24 calculators reviewed

Sarah Kim is a Certified Professional Estimator (CPE) with 15 years of construction cost estimation experience. She holds CPE certification from ASPE (member #20-4891). At Turner Construction, she managed material cost analysis on commercial projects ranging from $2M to $45M. At CalcSummit, she writes and verifies all cost estimation and interior finish calculators, updating regional cost benchmarks quarterly using RS Means-informed data.

Full profile →

Deck Construction Cost Questions

Advertisement

Run the deck construction cost calculator with your own length, width and add-ons, then compare each line with a written quote. For board counts, joists and posts, use the deck calculator. For a whole-house budget, start with the house construction cost calculator.