Concrete Driveway Calculator Guide
A concrete driveway calculator needs three numbers: length, width and slab thickness. A 20 by 40 ft driveway at 4 inches takes 9.88 cubic yards of concrete, or 10.86 with a 10% allowance. The gravel base under it needs the same 9.88 cubic yards at 4 inches compacted.
This guide is part of our project calculators. For slab volume alone, use the concrete calculator.
- Updated November 2026
- Sources Cited
- No Login Required
- Free to Use
Your driveway quantities
Concrete to order
10.86 cubic yards
9.88 cubic yards before the 10% allowance, over 800 sq ft. A 4 in slab uses 1.23 cubic yards per 100 sq ft.
| Step | Quantity |
|---|---|
| 1. Driveway area | 800 sq ft |
| 2. Concrete with allowance | 10.86 cubic yards |
| 3. Rebar #4 grid, with allowance | 1276 ft (15 + 28 bars) |
| 4. Gravel base with allowance | 10.86 cubic yards |
| 6. 80 lb bags, if mixed by hand | 489 bags |
Rebar weight is about 775 lb before allowance. Forms, labor, finishing and delivery are not in the number.
One size, every step
Enter length and width once. Yards, rebar and base follow.
Slab and base
Both layers in one result, each with an allowance.
Your price, not ours
No built-in price. Type your quote to see a cost.
A planning estimate, not a bid. Need only the slab volume? Use the concrete calculator.
How Much Concrete Does a Driveway Need?
Concrete is sold by the cubic yard. Cubic yards equal area times slab thickness in feet, divided by 27. A 20 by 40 ft driveway at 4 inches needs 9.88 cubic yards. Order about 10% more for waste, which gives 10.86 cubic yards.
| Line | Calculation | Result |
|---|---|---|
| Area | 40 ft x 20 ft | 800 sq ft |
| Volume at 4 in | 800 sq ft x 4 / 12 | 266.67 cu ft |
| Concrete | 266.67 cu ft / 27 | 9.88 cu yd |
| Order with 10% allowance | 9.88 x 1.10 | 10.86 cu yd |
| Gravel base at 4 in | 800 sq ft x 4 / 12 / 27 | 9.88 cu yd |
| Base with 10% allowance | 9.88 x 1.10 | 10.86 cu yd |
| Rebar #4 at 18 in | 15 bars x 40 ft + 28 bars x 20 ft | 1,160 ft |
Cubic yards per 100 sq ft
A 4 inch slab uses 1.23 cubic yards per 100 sq ft. A 5 inch slab uses 1.54. A 6 inch slab uses 1.85. Use these figures to check a supplier's quote.
Yards for sample sizes
| Size | Area | Yards at 4 in | With 10% allowance |
|---|---|---|---|
| 20 x 20 ft | 400 sq ft | 4.94 | 5.43 |
| 20 x 40 ft | 800 sq ft | 9.88 | 10.86 |
| 12 x 100 ft | 1,200 sq ft | 14.81 | 16.30 |
For other slab shapes, footings and walls, use the full concrete calculator.
The Six Steps in Order
A concrete driveway job runs in six steps. Measure the area, then size the concrete, the rebar grid and the gravel base. Check the cost next. Count bags only if you mix by hand. Each step uses the area from step 1, so measure once and carry the number forward.
Step 1: Square Footage Calculator
Driveway area, including the apron. This guide's example is 800 sq ft. Every later quantity is built on it.
Step 2: Concrete Calculator
Cubic yards for the slab. The example needs 9.88 cubic yards at 4 inches, or 10.86 with a 10% allowance.
Step 3: Rebar Calculator
The rebar grid. #4 bars at 18 inches on center come to 1,160 linear feet for the example.
Step 4: Gravel Calculator
Compacted gravel under the slab. A 4 inch base under the example is 9.88 cubic yards before allowance.
Step 5: Concrete Cost Calculator
Cost of ready-mix delivery against mixing bags yourself. Use it once you know the yards from step 2.
Step 6: Concrete Bag Calculator
Optional, for do-it-yourself work. Bag count for a small apron or repair next to the main pour.
Gravel Base Under the Slab
A compacted gravel base keeps the slab level and drains water away. This site's gravel calculator page gives 4 to 6 inches of compacted gravel for a residential driveway. For the 20 by 40 ft example, a 4 inch base is 9.88 cubic yards, or 10.86 with a 10% allowance.
- Size the base with the gravel calculator. It adds a settling buffer for driveways.
- The planner uses one base depth for the whole driveway. For a deeper base, raise the depth and the volume follows.
How Thick Should a Concrete Driveway Be?
The concrete calculator page on this site lists 4 to 6 inches for a residential driveway. Thickness changes the order directly, so the table shows each step for the 20 by 40 ft example. Strength matters too, and freeze-thaw climates call for air-entrained concrete.
| Slab thickness | Yards per 100 sq ft | Yards for 800 sq ft | With 10% allowance |
|---|---|---|---|
| 4 in | 1.23 | 9.88 | 10.86 |
| 5 in | 1.54 | 12.35 | 13.58 |
| 6 in | 1.85 | 14.81 | 16.30 |
| Driveway type | Minimum | Recommended |
|---|---|---|
| No freeze-thaw | 3,000 psi | 3,500 psi |
| Freeze-thaw climate | 4,000 psi air-entrained | 4,000 psi air-entrained |
These strengths come from the CalcSummit Concrete Calculator page. That page cites ACI 330R and the IRC for them and has not been rechecked against the primary standards for this guide. Your local code and supplier set the mix you use. Confirm it before you order.
Rebar for a Concrete Driveway
The rebar calculator page on this site uses #4 bars at 12 to 18 inches on center in both directions for a residential driveway. For the 20 by 40 ft example at 18 inches, that is 15 bars of 40 ft and 28 bars of 20 ft. The total is 1,160 linear feet, about 775 lb.
Bars per direction equal the span in inches divided by the spacing, rounded up, plus one. Add an allowance for laps and cuts: 1,276 ft at 10%. Size other bar sizes and spacing with the rebar calculator.
Ready-Mix or Bags for a Driveway
The concrete calculator page on this site says to order ready-mix above about 1.5 to 2 cubic yards. The 20 by 40 ft example needs 489 bags with a 10% allowance, which is not practical by hand. Use ready-mix for the slab.
Bags still help for a small apron, a step or a repair next to the main pour. Count them with the concrete bag calculator. The planner counts 80 lb bags at 0.60 cubic feet each, the yield used on that page.
Concrete Driveway Cost
Material cost equals the cubic yards you order times the delivered price per cubic yard. Installed cost adds forms, gravel base, rebar, labor and finishing. This guide found no sourced price for a concrete driveway, so the planner ships without one. Type your supplier quote into the planner to see a material cost.
- Cost per square foot equals the full quote divided by the driveway area.
- Compare ready-mix delivery against bags with the concrete cost calculator.
- Prices change by region and season. Get written quotes before you budget.
Questions to Ask Your Concrete Supplier
Put your quantities next to each quote before you sign. A quote that differs a lot from 10.86 cubic yards for your size needs an explanation. Ask these questions and write down the answers.
- How many cubic yards and what slab thickness does the quote cover?
- What strength and air content is the mix, and does it suit my climate?
- Is there a short-load fee, and what is the truck minimum?
- What base and rebar does the price include, and who compacts the base?
- How long before I can walk on the slab and drive on it?
The concrete calculator page on this site says to walk on concrete after 24 to 48 hours. It says to drive on it after 7 days at normal temperatures. Confirm the timing for your mix.
Frequently Asked Questions
Sources and Review
Published November 2026. Last updated November 2026. Next review February 2027. This guide gives planning estimates, not a bid. Confirm thickness, strength, rebar and price with a licensed contractor or your local building department before you order.

Reviews: volume calculators · 38 calculators reviewed
Alex Rivera is a Licensed Professional Engineer (PE) with 18 years of structural and civil engineering experience. He holds PE licenses in California (#C-89412) and Texas (#P.E.-98765). He previously served as Engineer of Record on 250+ residential foundation designs at Thornton Tomasetti. At CalcSummit, he writes and personally reviews every structural, concrete, rebar, deck, and framing calculator against current IRC and ACI 318 standards.
Full profile →