Skip to main content
CalcSummitCalcSummit
Project Guide · Deck · Footings to Stairs

Deck Building Calculator Guide

A deck building calculator needs five numbers: length, width, height above grade, joist spacing and footing depth. A 12 by 16 ft deck at 16 inch joist spacing takes 13 joists, 3 beams, 9 posts and 58 boards with 10% waste. Its 9 footings take 45 bags of 80 lb concrete.

This guide is part of our project calculators. For board counts alone, use the deck calculator.

  • Updated November 2026
  • Sources Cited
  • No Login Required
  • Free to Use
Live Planner · Footings · Framing · Boards · Stairs

Plan Your Deck

Enter the deck size once. The same size feeds every step below.

Footings must reach below your local frost line. Ask your building department for the depth.

Boards are 5/4 x 6 pressure-treated, 12 ft long, laid straight.

Your deck quantities

Footing concrete (80 lb bags)

45 bags

9 posts, 5 bags each. 24.74 cubic feet, or 0.92 cubic yards, over 192 sq ft of deck.

Quantities for each step of the deck job.
StepQuantity
1. Footings9 posts, 45 bags
2. Beams3
2. Joists13
3. Boards, before waste52
3. Boards, with waste58
4. Stair risers4 at 7.5 in
4. Treads and stringers3 treads, 3 stringers

Boards are counted at 5/4 x 6 by 12 ft. Ledger, hangers, screws, railings and permits are not in the numbers.

One size, every step

Enter length and width once. Footings, frame, boards and stairs follow.

Same rules as our calculators

The math matches the Deck, Sonotube and Stair calculators.

Quantities, not prices

No built-in price. Use your own quotes for cost.

A planning estimate, not a bid. Need only the decking boards? Use the deck calculator.

Advertisement

The Five Inputs of a Deck Building Calculator

Five numbers size a whole deck. Length and width set the area. Height above grade sets the stairs. Joist spacing sets the frame. Footing depth sets the concrete. The worked example below is a 12 by 16 ft deck, 192 sq ft, 30 inches above grade, with joists at 16 inches and 12 inch tubes 42 inches deep.

Step by step footing, framing and board quantities for a 12 by 16 ft deck.
LineCalculationResult
Area12 ft x 16 ft192 sq ft
Boards acrossceil(144 in / 5.625 in)26
Coursesceil(192 in / 144 in)2
Boards before waste26 x 252
Boards with 10% wasteceil(52 x 1.10)58
Joists at 16 inceil(192 in / 16 in) + 113
Beamsceil(12 ft / 8 ft) + 13
Posts3 x (ceil(16 ft / 8 ft) + 1)9
Concrete per footing3.1416 x 6 in x 6 in x 42 in / 1,7282.75 cu ft
Bags per postceil(2.75 / 0.60)5
Total bags5 x 945
Footing concrete24.74 cu ft / 270.92 cu yd

The rules match the live deck calculator, so the two tools agree. Measure the footprint first with the square footage calculator if the deck is not a plain rectangle.

The Steps in Order

A deck job runs from the ground up. Size the footings first, then the frame, then the boards, then the stairs. Each step uses the length, width and height you entered once, so measure once and carry the numbers forward.

  1. Step 1: Square Footage Calculator

    Deck area. This guide's example is 192 sq ft. Every later quantity starts from the length and width.

  2. Step 2: Deck Calculator

    Boards, joists, beams and posts, with board type and diagonal layout. The example needs 58 boards with 10% waste, 13 joists, 3 beams and 9 posts.

  3. Step 3: Sonotube Calculator

    Footing tubes in detail. One 12 inch tube 42 inches deep holds 2.75 cubic feet, which is 5 bags of 80 lb mix.

  4. Step 4: Concrete Calculator

    Footing concrete as a volume, for a ready-mix order or a check. The 9 footings add up to 0.92 cubic yards.

  5. Step 5: Lumber Calculator

    Board feet for joists, beams and posts once you pick the lumber sizes.

  6. Step 6: Stair Calculator

    Stair geometry in full. At 30 inches of rise the example has 4 risers of 7.50 inches, 3 treads and 3 stringers.

  7. Step 7: Deck Cost Calculator

    Not built yet. Until it is, multiply each quantity above by the price from your own supplier quote.

Four steps of the deck job with the quantities for a 12 by 16 ft deck.
Figure C. Footings, framing, boards and stairs for the 12 by 16 ft example.

Footings Under a Deck

Each post sits on a footing. One 12 inch tube 42 inches deep holds 2.75 cubic feet of concrete. An 80 lb bag yields 0.60 cubic feet, so each footing takes 5 bags. The 9 footings of the example take 45 bags, or 0.92 cubic yards.

  • Footings must reach below your local frost line. The Deck Calculator page on this site says frost depth varies by region. Ask your building department.
  • The 42 inch depth is the default used by the Deck Calculator. It is not a code value for your area.
  • Change the tube diameter or depth in the planner. Check tube sizes with the sonotube calculator.
  • Above about 1.5 to 2 cubic yards, ask about ready-mix. The concrete calculator page covers the threshold.

Framing: Joists, Beams and Posts

Joists equal the deck length in inches divided by the spacing, rounded up, plus one. Beams equal the width in feet divided by 8, rounded up, plus one. Posts equal the beams times the length in feet divided by 8, rounded up, plus one. The 12 by 16 ft example has 13 joists, 3 beams and 9 posts.

Deck sizes side by side

Area, joists, beams, posts and footing bags for five sample deck sizes at 16 inch joist spacing.
SizeAreaJoistsBeamsPostsFooting bags
10 x 10 ft100 sq ft93945
12 x 12 ft144 sq ft103945
12 x 16 ft192 sq ft133945
12 x 20 ft240 sq ft1631260
16 x 20 ft320 sq ft1631260
Bars of posts by deck size: 10 x 10 has 9, 12 x 12 has 9, 12 x 16 has 9, 12 x 20 has 12, 16 x 20 has 12.
Figure B. Posts and footing bags for five deck sizes.

Joist spacing changes the count

The 12 by 16 ft example needs 17 joists at 12 inches, 13 at 16 inches and 9 at 24 inches. The Deck Calculator page cites 16 inches as the default under IRC R507.6. It also says composite boards need 16 inches or tighter. The beam and post spacing of 8 ft is a conservative default from the same page. Ask an engineer to size beams and posts for your load.

Decking Boards and Waste

The planner counts 5/4 x 6 pressure-treated boards, 12 ft long, laid straight with a 1/8 inch gap. Boards across equal the width in inches divided by 5.625, rounded up. Courses equal the length divided by 12 ft, rounded up. The example takes 26 boards across and 2 courses, which is 52 boards, or 58 with 10% waste.

  • The planner starts with a 10% waste factor for a straight layout. The Deck Calculator source uses 15% for diagonal pressure-treated boards and 20% for diagonal composite.
  • A width over 12 ft is longer than one board. The Deck Calculator then advises butt joints and 5% more waste.
  • Screws, hidden fasteners and board type are set in the deck calculator.
  • Board feet for framing lumber come from the lumber calculator.

Deck Stairs

Risers equal the height above grade divided by 7, rounded to the nearest whole number. The actual riser is the height divided by the risers. Treads equal risers minus one. A 36 inch wide stair uses 3 stringers. At 30 inches the example has 4 risers of 7.50 inches, 3 treads and 3 stringers.

Risers, actual riser height, treads and stringers for five deck heights.
Height above gradeRisersActual riserTreadsUnder 7.75 in
24 in38.00 in2No, add a riser
30 in47.50 in3Yes
36 in57.20 in4Yes
48 in76.86 in6Yes
60 in96.67 in8Yes

The 7.75 inch maximum riser is the IRC R311.7.5.1 figure cited on the Stair Calculator page. It has not been rechecked against the code for this guide. When the riser comes out above it, add one riser. Tread depth, stringer length and the full code checks are in the stair calculator.

Deck Cost

Material cost equals each quantity times its price. Multiply the boards, joists, beams, posts, concrete bags and stair parts by the unit prices on your supplier quote, then add them up. This guide found no sourced price for a deck, so the planner ships without one.

  • Cost per square foot equals the full quote divided by the deck area of 192 sq ft in the example.
  • Railings, ledger hardware, joist hangers, permits and labor are not in the planner quantities.
  • For a materials cost range by board type, open the deck calculator.
  • Prices change by region and season. Get written quotes before you budget.

Questions to Ask Before You Order

Put your quantities next to each quote before you sign. A quote far from 58 boards and 13 joists for a 12 by 16 ft deck needs an explanation. Ask these questions and write down the answers.

  • What is the frost depth here, and what footing depth does the building department require?
  • Does the deck need a permit, and what plans does the office want to see?
  • What lumber sizes and grades does the quote cover for joists, beams and posts?
  • Are the boards 12 ft long, and what is the lead time?
  • Is there a delivery fee or a minimum order?

The planner gives quantities for an estimate. Your building department and a licensed professional decide beam sizes, post sizes, footings and stair details for your site.

Frequently Asked Questions

Advertisement

Sources and Review

Published November 2026. Last updated November 2026. Next review February 2027. This guide gives planning estimates, not a bid or a design. Confirm footings, framing, stairs and permits with a licensed contractor or your local building department before you order.

Alex Rivera, PE, PE — CalcSummit expert reviewer

Reviews: volume calculators · 38 calculators reviewed

Alex Rivera is a Licensed Professional Engineer (PE) with 18 years of structural and civil engineering experience. He holds PE licenses in California (#C-89412) and Texas (#P.E.-98765). He previously served as Engineer of Record on 250+ residential foundation designs at Thornton Tomasetti. At CalcSummit, he writes and personally reviews every structural, concrete, rebar, deck, and framing calculator against current IRC and ACI 318 standards.

Full profile →