Skip to main content
CalcSummitCalcSummit
Guide · Conversion · Linear Inches

How to Figure Linear Inches

Linear inches measure length along one line in inches. To figure them, measure each run in inches and add the runs. Divide by 12 for linear feet. Airlines and shippers use the term differently: length plus width plus height. A bag that is 30 in by 12 in by 20 in is 62 linear inches.

Need to convert a total to feet? Use the feet and inches calculator.

  • Updated November 2026
  • Sources Cited
  • No Login Required
  • Free to Use

What Are Linear Inches?

Linear inches has two meanings. In construction, a linear inch is 1 in of length along one line, and 12 linear inches make 1 linear foot. Width and thickness do not count. Airlines and shipping carriers use the same words for a different sum: length plus width plus height of a bag or box. Pick the meaning that fits your job before you measure.

  • Construction: 1 linear inch = 1 in of length along one line.
  • 12 linear inches = 1 linear foot.
  • Airlines and shippers: linear inches = length + width + height.

For feet, see how to figure linear feet. For other unit jobs, browse the conversion calculators hub.

How to Figure Linear Inches, Step by Step

Follow these five steps for trim, framing, glass or any run you measure in inches.

  1. Measure each straight run in inches. Use a tape measure end to end on each side, board or piece. Measure each run that turns a corner on its own.
  2. Turn fractions into decimals. Write 34 1/2 in as 34.5 in. Divide the top of the fraction by the bottom to get the decimal.
  3. Add the runs together. The total of all runs is the linear inches. Three runs of 34.5, 48, 34.5 in add to 117 in.
  4. Subtract openings the material skips. Take off door or gate openings when the material does not run across them.
  5. Divide by 12 for linear feet. Linear feet equal linear inches divided by 12. 117 in is 9.75 linear feet, or 9 ft 9 in.

Linear Inch Formulas

Five formulas cover most linear inch jobs. The first four use the construction meaning. The last one is the airline and shipping meaning.

Formula and worked example for a sum of runs, a rectangle, a square, a conversion to feet and a bag.
UseFormulaExample
Sum of runslinear inches = run 1 + run 2 + run 334.5 + 48 + 34.5 = 117 in
Rectangle perimeterlinear inches = 2 x (length + width)2 x (36 + 48) = 168 in
Square piecelinear inches = 4 x side4 x 12 = 48 in
Inches to linear feetlinear feet = linear inches / 12168 / 12 = 14 linear feet
Bags and boxeslinear inches = L + W + H30 + 12 + 20 = 62 in

Linear Inches to Feet Table

Use this table to turn linear inches into feet and inches or into decimal linear feet. Divide by 12 for the feet. The remainder is the inches. Values are exact, with no waste added.

Twelve totals in linear inches with the matching feet and inches and decimal linear feet.
Linear inchesFeet and inchesLinear feet
12 in1 ft 0 in1 ft
24 in2 ft 0 in2 ft
36 in3 ft 0 in3 ft
48 in4 ft 0 in4 ft
60 in5 ft 0 in5 ft
62 in5 ft 2 in5.1667 ft
72 in6 ft 0 in6 ft
75 in6 ft 3 in6.25 ft
96 in8 ft 0 in8 ft
117 in9 ft 9 in9.75 ft
120 in10 ft 0 in10 ft
168 in14 ft 0 in14 ft

Worked Examples

A window frame

Note
Window. A window frame is 36 in wide and 48 in tall. The frame is 2 x (36 + 48) = 168 linear inches. Divide by 12 to get 14 linear feet of trim, before waste.

Three trim pieces

Note
Trim. A trim job has three pieces of 34.5 in, 48 in, 34.5 in. The total is 117 linear inches. Divide by 12 to get 9.75 linear feet, which is 9 ft 9 in.
Three runs of 34.5, 48 and 34.5 inches add to 117 linear inches, which is 9.75 linear feet.
Figure A. Add each run in inches, then divide the total by 12 for linear feet.

To add or subtract mixed readings, use the feet and inches calculator.

Linear Inches for Luggage and Shipping

Airlines list a total of length plus width plus height for a checked bag. American Airlines, for example, charges an oversize fee on checked bags over 62 in in total dimensions and does not accept bags over 115 in. Measure the outside of the bag and include wheels, handles and pockets. Carrier rules change, so read your airline's current policy before you fly. This guide explains the arithmetic only.

Note
Bag. A bag is 30 in long, 12 in wide and 20 in tall. The sum is 30 + 12 + 20 = 62 linear inches. A total of 62 in is also 5 ft 2 in, but that is a sum of three sides, not one length.
Airline linear inches add length, width and height. A 30 by 12 by 20 inch bag is 62 linear inches.
Figure B. For bags and boxes, linear inches are length plus width plus height.

Common Mistakes When Figuring Linear Inches

  • Mixing the two meanings. A bag total of 62 in is not a 62 in length. Do not turn a bag total into linear feet.
  • Leaving fractions out. A 1/2 in per piece adds up over many pieces. Convert fractions to decimals first.
  • Adding feet to inches. Write every run in inches, then add. Convert to feet at the end.
  • Measuring a bag without the wheels and handles. Carriers count the outside size.
  • Forgetting waste. For trim or framing, add an allowance to the linear feet, not to the inches of a single piece.

Frequently Asked Questions

Advertisement

Sources and Review

Note
How the numbers were checked. Every figure on this page was recomputed by code from 12 in = 1 ft and the sums on this page. The formula table, the inch table and the worked examples come from the same functions.

Sources

  • Omni Calculator, Linear Inches Calculator: length plus width plus height, the 62 linear inch example and the note on wheels and handles. Read on November 20, 2026. This page recomputed every number itself.
  • American Airlines, Oversize and overweight bags: total dimensions are length plus width plus height, an oversize fee applies over 62 in, and bags over 115 in are not accepted. Read on November 20, 2026. Other carriers set their own limits.

Published November 2026. Last updated November 2026. Next review May 2027. Technical review is pending. This page explains how to figure a length. It is not a design, a bid or a carrier rule. For structural, code or permit work, confirm dimensions with the licensed professional on the project.

Rachel Torres, M.Ed., M.Ed. — CalcSummit expert reviewer

Reviews: conversion calculators · 22 calculators reviewed

Full profile →