Roof Replacement Calculator Guide
A roof replacement calculator needs four numbers: footprint length, footprint width, pitch and waste. A 40 by 30 ft footprint at 6 in 12 has a pitch factor of 1.118, so 1,341.64 sq ft of roof. That is 13.42 squares, or 15 squares to order with 10% waste.
This guide is part of our project calculators. For shingle counts alone, use the roofing calculator.
- Updated November 2026
- Sources Cited
- No Login Required
- Free to Use
Your roof quantities
Roofing squares to order
15 squares
13.42 squares of roof, 14.76 with waste. Sloped area 1341.64 sq ft from a 1200 sq ft footprint.
| Step | Quantity |
|---|---|
| 1. Footprint | 1200 sq ft |
| 2. Pitch factor | 1.118 |
| 3. Sloped area | 1341.64 sq ft |
| 3. Squares, before waste | 13.42 |
| 3. Squares, to order | 15 |
| 3. Shingle bundles | 60 |
| 3. Ridge cap bundles | 2 |
| 4. Gutter length | 88 ft |
| 4. Downspouts | 4 |
Tear-off, underlayment, flashing, drip edge, valleys and permits are not in the numbers. Gutters assume two eave runs of the footprint length.
One roof, every step
Enter the footprint once. Pitch, squares, bundles and gutters follow.
Same rules as our calculators
The math matches the Roofing, Roof Pitch and Gutter calculators.
Quantities, not prices
No built-in price. Use your own quotes for cost.
A planning estimate, not a bid. Need only the shingle count? Use the roofing calculator.
The Inputs of a Roof Replacement Calculator
Four numbers size most of a roof job. Footprint length and width set the base area. Pitch turns that area into sloped roof. Waste sets how much extra to order. Ridge length and bundles per square finish the shingle count. The worked example is a 40 by 30 ft footprint, 1,200 sq ft, at 6 in 12 pitch with 10% waste and architectural shingles.
| Line | Calculation | Result |
|---|---|---|
| Footprint | 40 ft x 30 ft | 1,200 sq ft |
| Pitch factor | sqrt(6 x 6 + 144) / 12 | 1.118 |
| Sloped area | 1,200 x 1.118 | 1,341.64 sq ft |
| Squares before waste | 1,341.64 / 100 | 13.42 |
| Squares with 10% waste | 13.42 x 1.10 | 14.76 |
| Squares to order | ceil(14.76) | 15 |
| Architectural bundles | 15 x 4 | 60 |
| 3-tab bundles | 15 x 3 | 45 |
| Ridge cap bundles | ceil(40 / 100 x 3) | 2 |
| Eave length | 2 runs x 40 ft | 80 ft |
| Gutter with 10% overage | 80 x 1.10 | 88 ft |
| Downspouts | 2 runs x ceil(40 / 30) | 4 |
The rules match the live roofing calculator and gutter calculator, so the tools agree. Measure the footprint first with the square footage calculator if the house is not a plain rectangle.
The Steps in Order
A roof job runs from the footprint up. Measure the house first, then the pitch, then the roofing squares, then the gutters, then the cost. Each step uses the length, width and pitch you entered once, so measure once and carry the numbers forward.
Step 1: Square Footage Calculator
House footprint area. This guide's example is 1,200 sq ft. Every later quantity starts here.
Step 2: Roof Pitch Calculator
Pitch from rise and run. A 6 in 12 pitch has a factor of 1.118, so the roof is that much bigger than the footprint.
Step 3: Roofing Calculator
Roofing squares and shingle bundles with waste, ridge and material choices. The example needs 15 squares and 60 architectural bundles.
Step 4: Gutter Calculator
Gutter runs, hangers and downspouts in detail. The example has 80 ft of eave, which is 88 ft with 10% overage.
Step 5: Roofing Cost Calculator
Price ranges by material and region. This guide ships no price. Use the quantities above to check a roofer's quote.
Pitch and Sloped Area
Pitch factor equals the square root of rise squared plus 144, divided by 12, where rise is inches per 12 inches of run. Sloped area equals footprint area times the pitch factor. A 6 in 12 pitch has a factor of 1.118, so a 1,200 sq ft footprint becomes 1,341.64 sq ft of roof.
| Pitch | Pitch factor | Sloped area | Squares to order |
|---|---|---|---|
| 4 in 12 | 1.054 | 1,264.91 sq ft | 14 |
| 6 in 12 | 1.118 | 1,341.64 sq ft | 15 |
| 8 in 12 | 1.202 | 1,442.22 sq ft | 16 |
| 12 in 12 | 1.414 | 1,697.06 sq ft | 19 |
Do not know the pitch? Measure rise and run with the roof pitch calculator. The Roofing Calculator page cites a slope check under IRC R905.2 for shingles. That check is not repeated here.
Squares, Bundles and Waste
Squares equal sloped area divided by 100. Squares to order equal squares times one plus the waste, rounded up. Bundles equal squares to order times 3 for 3-tab or 4 for architectural shingles. The example has 13.42 squares, orders 15 with 10% waste, and needs 60 architectural bundles or 45 3-tab bundles.
Waste changes the order
| Waste | Squares with waste | Squares to order | Architectural bundles |
|---|---|---|---|
| 0% | 13.42 | 14 | 56 |
| 10% | 14.76 | 15 | 60 |
| 15% | 15.43 | 16 | 64 |
Roof sizes side by side
| Footprint | Sloped area | Squares to order | Bundles | Gutter |
|---|---|---|---|---|
| 30 x 20 ft | 670.82 sq ft | 8 | 32 | 66 ft |
| 40 x 30 ft | 1,341.64 sq ft | 15 | 60 | 88 ft |
| 50 x 30 ft | 1,677.05 sq ft | 19 | 76 | 110 ft |
| 60 x 40 ft | 2,683.28 sq ft | 30 | 120 | 132 ft |
The planner starts at 10% waste for a simple gable roof. The Roofing Calculator page uses 15% as its default for a hip roof. Roofs with many valleys or dormers waste more. Pick a shape and material in the roofing calculator.
Ridge Cap and What a Footprint Misses
Ridge cap bundles equal the ridge length in feet divided by 100, times 3, rounded up. A 40 ft ridge takes 2 bundles. The planner counts shingles, ridge cap and gutters. It does not count anything that a plain footprint cannot show.
- Overhangs at the eaves and rakes add roof area beyond the footprint.
- Dormers, valleys, hips and skylights change both area and waste.
- Tear-off, underlayment, flashing, drip edge, vents and starter strip are not in the numbers.
- Ask a roofer to confirm the squares on site before you order materials.
Gutters and Downspouts
A gable roof has two eave runs, each as long as the footprint length. Gutter length is the eave length plus 10% overage. Each run gets at least one downspout and one more for each 30 ft. The 40 ft example has 80 ft of eave, 88 ft of gutter and 4 downspouts.
- The 10% overage and the 25 to 30 ft downspout spacing come from the Gutter Calculator page and its cited sources.
- Hangers, elbows, end caps, corners and slope are in the gutter calculator.
- A replacement is the moment to check old gutters. They come off with the drip edge.
Roof Replacement Cost
Material cost equals squares to order times your price per square. Add tear-off, underlayment, flashing, ridge cap, gutters and permits from your quote. This guide found no sourced price for a roof replacement, so the planner ships without one. Type your own price in the planner to multiply it by the squares.
- Cost per square equals the full quote divided by the squares. The example orders 15 squares.
- Compare the roofer's squares with your 15. A large gap needs an explanation.
- For price ranges by material, open the roofing cost calculator.
- Prices change by region and season. Get written quotes before you budget.
Questions to Ask Your Roofer
Put your quantities next to each quote before you sign. A quote far from 15 squares for a 40 by 30 ft footprint at 6 in 12 needs an explanation. Ask these questions and write down the answers.
- How many squares does the quote cover, and how much waste is in that number?
- How many layers come off, and what happens to the old roofing?
- What underlayment, flashing and drip edge does the price include?
- Does the price include the ridge cap and the gutters?
- Does the job need a permit, and who pulls it?
The planner gives quantities for an estimate. Your building department and a licensed roofer decide materials, decking repairs and code details for your roof.
Frequently Asked Questions
Sources and Review
Published November 2026. Last updated November 2026. Next review February 2027. This guide gives planning estimates, not a bid or a design. Confirm squares, materials, decking and permits with a licensed roofer or your local building department before you order.

Reviews: area calculators · 29 calculators reviewed
David Chen is a Registered Architect (RA) and LEED Accredited Professional BD+C with 16 years of architectural practice. He holds California architect license #A-35207 and LEED AP BD+C credential #10294751. Previously at Gensler, he co-authored two RCI whitepapers on roof assembly performance. At CalcSummit, he writes and verifies all building envelope calculators — roofing, siding, windows, gutters, and waterproofing — against IBC 2021 and NRCA standards.
Full profile →